Share:


PHILIPS LAMP DRIVER FLUORESCENT EB-Ci 1-2 36W 1-4 18W 913713043180

PHILIPS LAMP DRIVER FLUORESCENT EB-Ci 1-2 36W/1-4 18W 220-240v 50/60Hz 913713043180

  • 913713043180 - EB-Ci 1-2 36W / 1-4 18W 220-240v 50/60Hz


B-Certalume for TL D lamps

Affordable, reliable, high-frequency electronic ballast for TL-D fluorescent lamps, ideal alternative to electromagnetic fluorescent systemsThe cost-saving and reliable EB-C has energy efficiency class A2, and its robust design meets all necessary international standards for safety and EMC. ;The ballast is primarily designed for indoor use. For outdoor use, the luminaire should be minimum Classâ… and be sufficiently protected against water and dust. The installation should also be protected against lightning surges or any other electrical protection deemed necessary in this type of installation and application.
 
 
 

Product Data

General Information

  • Lamp type : TL-D

  • Number of lamps : 1-4 piece/unit

  • Suitable for outdoor use : No

  • Number of products on MCB (16 A type B) (max.) : 28

  • Automatic restart : Yes


Operating and electrical

  • Input voltage : 220-240 V

  • Input frequency : 50 or 60 Hz

  • Operating frequency (nom.) : 42-60 kHz

  • Ignition method : Warm Start

  • Crest factor (max.) : 1.7

  • Ignition time (nom.) : 2.0 s

  • Mains voltage performance (AC) : -10%-+10%

  • Mains voltage safety (AC) : 198...264V

  • Earth leakage current (max.) : 0.5 mA

  • Inrush current width : 0.35 ms

  • Ballast factor (nom.) : 1

  • Power factor (max.) : 0.98

  • Power factor (min.) : 0.90

  • Input power (max.) : 70.2 W

  • Input power (min.) : 21.3 W

  • Power losses (max.) : 6.2 W

  • Power losses (nom.) : 3.3 W

  • Inrush current peak (max.) : 19 A

  • Rated lamp power : 18-36 W

 

Wiring

  • Connector type input terminals : Insert

  • Connector type input terminals : Insert

  • Cable capacity output wires mutual (max.) : 150 pF

  • Connector type output terminals : Insert

  • Cable length hot-wiring : 0.75 m

  • Wire strip length : 7.5-8.5 mm

  • Input terminal cross section : 0.50-1.50 mm²

  • Output terminal cross section : 0.50-1.50 mm²

  • Cable capacity output wires to earth (max.) : 150 pF

  • Connector type : Insert


System Characteristics

  • Rated Lamp Power on TL-D : 18-36 W

  • System Power on TL-D : 21.3-68.2 W

  • Lamp Power on TL-D : 18.0-31.0 W

  • Power Loss on TL-D : 3.3-6.2 W

 

Temperature

  • T ambient (max.) : 50 °C

  • T case lifetime (max.) : 75 °C

  • T-Case maximum (max.) : 75 °C

  • T-Ignition (max.) : 50 °C

  • T-Ignition (min.) :  -10 °C

 

Mechanical and housing

  • Housing material : Plastic

  • Housing : L210x30x26mm
     

Emergency operation

  • Battery Voltage Lamp Ignition : 165-253 V


Approval and application

  • Energy efficiency index : A2

  • IP classification : IP 20 [ Ingress Protection 20]

  • EMI 9 kHz... 30 MHz : EN55015

  • EMI 30 MHz... 1,000 MHz : EN 55015

  • Environmental standard : ISO 14001

  • Vibration standard : IEC60068-2-6 F c

  • Bumps standard : Not specied

  • Approval marks : CB Certicate CCC certicate TISI marking PSB certication RCM compliance

  • Temperature marking : Yes

  • Humming and noise level : < 30 dB(A)


Product Data

  • Full product code : 694793913353600

  • Order product name : EB-Ci 1-2 36W / 1-4 18W 220-240V 50/60Hz

  • EAN/UPC – product : 6947939133536

  • Order code : 913713043180

  • Numerator – quantity per pack : 1

  • Numerator – packs per outer box : 30

  • Material no. (12NC) : 913713043180

  • Net weight (piece) : 0.080 kg




Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.