Share:


OSRAM ELEMENT 12/220-240/300 G3

OSRAM ELEMENT 12/220-240/300 G3

  • 12/220-240/300 G3


Product family features
  • Fixed output (no dimming)
  • Input voltage: 220 - 240 VAC
  • Suitble for Class I/II luminaires
  • Output current range 150-1050 mA
  • Up to 30000 h lifetime at tcmax = 80°C
  • Typ. Efficiency: from 82% to 90% depend on different wattage
  • SELV
  • Ambient temp range, ta: -20°C to +50°C
Product family benefits
  • Safety ensured by OSRAM (SELV)
  • 3 years guarantee
  • High quality of light with ripple current < 5%
Areas of application
  • Spot light and down kight
  • Panels
  • Other indoor LED luminaires
Electrical data
  • Nominal voltage : 220…240 V
  • Mains frequency : 50…60 Hz
  • Input voltage AC : 198...264 
  • Total harmonic distortion : < 10 %
  • Power factor : 0.97
  • Efficiency in full-load : 86 %
  • Device power loss : 2.1W
  • Protective conductor current : <0.7 mA
  • Inrush current L : < 7.0 A
  • Max. ECG no. on circuit breaker 10 A (B) : 61
  • Max. ECG no. on circuit breaker 10 A (C) : 92
  • Max. ECG no. on circuit breaker 16 A (B) : 98
  • Max. ECG no. on circuit breaker 16 A (C) : 147
  • Max. ECG no. on circuit breaker 25 A (B) : 153
  • Surge capability (L/N-Ground) : 2 kV
  • Surge capability (L-N) : 1 kV
  • Nominal output voltage : 24…42 V
  • U-OUT (working voltage) : 60 V
  • Nominal output current : 300 mA
  • Output current tolerance : ±7.5 %
  • Output ripple current (100 Hz) : < 5 %
  • Output PSTLM : ≤1
  • Output SVM : ≤0.4
  • Nominal output power : 7.2…12.6 W
  • Maximum output power : 8.4 W
  • Galvanic isolation : SELV
  • Input voltage DC: -
  • Galvanic isolation primary/secondary : SELV
  • Current set : Fixed current
  • Mounting hole spacing, length : 80.0 mm
  • Mounting hole spacing, width : 34.0 mm
  • Product weight : 52.00 g
  • Cable cross-section, input side : 0.5…1.5 / 0.75…1.5 mm² 1)
  • Cable cross-section, output side : 0.5…1.5 / 0.75…1.5 mm² 1)
  • Wire preparation length, input side : 7…8 mm
  • Wire preparation length, output side : 7…8 mm
  • Length : 90.0 mm
  • Width : 43.0 mm
  • Height : 22.0 mm


Temperatures & operating conditions
  • Ambient temperature range : -20…+50 °C
  • Maximum temperature at tc test point : 80 °C
  • Max.housing temperature in case of fault : 110 °C
  • Temperature range at storage : -40…+85 °C
  • Permitted rel. humidity during operation : 5…85 % 

Lifespan
  • ECG lifetime : 30000 h / 50000h

Capabilities
  • Dimmable : No
  • Overheating protection : No
  • Overload protection : Automatic reversible
  • Short-circuit protection : Automatic reversible
  • No-load proof : Automatic reversible
  • Intended for no-load operation : No
  • Max. cable length to lamp/LED module : 2.0 m 
  • Suitable for fixtures with prot. class : I / II
  • Type of connection, input side : Push terminal
  • Type of connection, output side : Push terminal
  • Suitable for through-wiring : No
  • Number of channels : 1

Certificates & standards
  • Approval marks – approval : CE / CCC / RCM / ENEC 25 
  • Standards : Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 61000-3-3
  • Type of protection : IP20
  • Protection class : I,II


 

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.