Share:


OSRAM OT FIT 40/220...240/1A0 CS PC

OSRAM OT FIT 40/220...240/1A0 CS PC

  • 40/220...240/1A0 CS PC

Product family features
  • Cacle clamp housing for independent mounting
  • Dimmable on the leading edge and trailing edge
  • Housing for independent installation
Product family benefits
  • Compatible with the most common leading-edge and trailing phase dimmers
  • Flexible current setting (DIPswitch - 2 to 4 currents)
  • Flicker-free dimming
  • Higher quality of light thanks to < 5% output ripple current
Areas of application
  • Decorative illumination
  • Downlights, flat luminaires
  • Hospitality
  • Living areas
  • Museums, residential buildings
  • Offices
  • Shop lighting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection class I and II
Electrical data
  • Nominal voltage : 220…240 V
  • Mains frequency : 50…60 Hz
  • Input voltage AC : 198...264  V
  • Total harmonic distortion : < 20 %
  • Power factor : > 0.95
  • Efficiency in full-load : 85 %
  • Device power loss : 6.7 W
  • Protective conductor current : <0.7 mA
  • Inrush current L : < 10 A
  • Max. ECG no. on circuit breaker 10 A (B) : 18
  • Max. ECG no. on circuit breaker 10 A (C) : 18
  • Max. ECG no. on circuit breaker 16 A (B) : 28
  • Max. ECG no. on circuit breaker 16 A (C) : 28
  • Max. ECG no. on circuit breaker 25 A (B) : -
  • Surge capability (L/N-Ground) : 2 kV
  • Surge capability (L-N) : 1 kV
  • Nominal output voltage : 27…40 V
  • U-OUT (working voltage) : 60 V
  • Nominal output current : 800/900/950/1050 mA
  • Output current tolerance : ±10 %
  • Output ripple current (100 Hz) : < 5 %
  • Output PSTLM : ≤1
  • Output SVM : ≤0.4
  • Nominal output power : 21.6…42 W
  • Maximum output power : 42 W
  • Galvanic isolation primary/secondary : SELV
  • Current set : DipSwitch
  • Default output current : 1050 mA
  • Mounting hole spading, length : 99.0 mm
  • Mounting hole spading, width : 58.0 mm
  • Product weight : 130.00 g
  • Cable cross-section, input side : 0.5…1.5 mm² 
  • Cable cross-section, output side : 0.5…1.5 mm² 
  • Wire preparation length, input side : 9.0…10.0 mm
  • Wire preparation length, output side : 9.0…10.0 mm
  • Length : 108.0 mm
  • Width : 67.0 mm
  • Height : 22.0 mm
Temperatures & operating conditions
  • Ambient temperature range : -20…+50 °C
  • Maximum temperature at tc test point : 75 °C
  • Max.housing temperature in case of fault : 110 °C
  • Temperature range at storage : -40…+85 °C
  • Permitted rel. humidity during operation : 5…85 % 
Lifespan
  • ECG lifetime : 35000 h / 50000h
Capabilities
  • Dimmable : Yes
  • Dimming interface : Phase cut
  • Dimming range : 5…100 %
  • Dimming method Amplitude Modulation
  • Overheating protection : Automatic reversible
  • Overload protection : Automatic reversible
  • Short-circuit protection : Automatic reversible
  • No-load proof : Yes
  • Intended for no-load operation : No
  • Max. cable length to lamp/LED module : 2.0 m 
  • Suitable for fixtures with prot. class : I / II
  • Type of connection, input side : Push terminal
  • Type of connection, output side : Push terminal
  • Suitable for through-wiring : No
  • Control interface :  -
  • Detection angle (Light sensor) :  -
  • Detection angle (PIR) :  -
  • Number of channels : 1
Certificates & standards
  • Approval marks – approval : CE
  • Standards : Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 6100-4-5/Acc. to IEC 61547
  • Protection class : I,II
  • Type of protection : IP20

 

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.