IMITOS MoiSti LED Driver 30W N9090 | Original Replacement
The IMITOS MoiSti LED Driver 30W (N9090) is a high-performance, constant current power supply designed specifically for 30W LED panel lights and surface downlights. It features a stable 300mA output and a wide DC55-85V range, ensuring flicker-free lighting and prolonged LED lifespan. Compatible with Malaysia’s standard AC220-240V input.
Full Description:
When your LED ceiling light starts flickering or fails to turn on, the culprit is often the driver rather than the LED chips themselves. The IMITOS MoiSti LED Driver 30W (Item No: N9090) serves as the perfect original replacement part to restore your lighting fixtures to full brightness. Engineered for the Malaysian electrical climate, it handles voltage fluctuations with precision, providing a steady current that protects your investment.
Technical Specifications & Performance
The N9090 model is built for efficiency. With a power consumption of 30W, it is optimized for larger LED surface panels (typically 300mm x 300mm or equivalent).
-
Input Stability: It operates seamlessly on AC220-240V 50/60Hz, matching the standard domestic power supply in Malaysia.
-
Output Precision: The driver delivers DC55-85V with a constant current of 300mA±5%. This constant current technology is vital for preventing "thermal runaway," a common cause of LED failure.
Why Choose IMITOS MoiSti N9090?
-
Flicker-Free Experience: Poor quality drivers cause micro-flickering which leads to eye strain and headaches. The IMITOS N9090 ensures a smooth, continuous light output.
-
Easy Installation: Designed as a "plug-and-play" component for IMITOS MoiSti series panel lights, it comes with standard connectors for a hassle-free DIY replacement.
-
Safety First: Built with flame-retardant materials and internal surge protection, this driver meets the rigorous safety expectations of Malaysian homeowners and contractors.
-
Universal Compatibility: While optimized for IMITOS fixtures, the 300mA output makes it compatible with various 30W LED brands requiring similar voltage ranges (DC55-85V).
Installation & Maintenance Tips
To ensure the longest lifespan for your IMITOS N9090,ensure that the driver is placed in a well-ventilated area within the ceiling void or light casing. Although LED drivers are more efficient than old-fashioned ballasts, they still generate a small amount of heat. Keeping the driver cool will extend its operational life beyond the standard 30,000-hour expectation.Before replacing, always switch off the main power supply. Check the output mA of your existing faulty driver—if it matches the 300mA rating of the N9090, this is the ideal replacement for you.
Specification:
Frequently Asked Questions for IMITOS MoiSti LED Driver 30W - N9090
In over 90% of cases, a flickering or strobing LED ceiling light is caused by a failing LED driver rather than the LED panel itself. The driver can no longer regulate a smooth stream of current. Replacing your old unit with the IMITOS MoiSti LED Driver 30W (N9090) will instantly stabilize the electricity flow and stop the flickering.
300mA indicates that the driver delivers a constant current flow of 300 milliamperes to your light chips. The ±5% is the precision tolerance factor. This strict regulation ensures that even if your home,main voltage fluctuates,your light brightness stays steady without dimming.
No, the standard IMITOS MoiSti N9090 is a non-dimmable LED driver. It must be paired exclusively with a standard on/off wall switch. Connecting this driver to a phase-cut or triac dimmer switch will cause loud buzzing noises, heavy flickering, and will eventually fry the internal circuit.
The IMITOS MoiSti N9090 is an internal ballast unit designed for direct ceiling hardwiring (AC220-240V). It does not come with a standard domestic 3-pin plug. The brown and blue input wires must be connected directly into your home ceiling electrical junction point.
The primary killers of lighting electronics in Malaysia are trapped ambient heat inside plaster ceiling boards, humidity, and minor electrical power surges from lightning strikes. The IMITOS MoiSti series utilizes heat-resistant internal capacitors to better withstand these conditions.
If you are comfortable with basic home DIY maintenance, swapping a driver involves simply disconnecting two AC input wires and plugging in the DC terminal socket. However, always turn off your home main distribution board (DB) breaker before touching any wires. If unsure,always hire a certified wireman.
Sorry, currently do not have any video uploaded.
