IMITOS 4-7W LED Driver TX-WP002 Power Supply
Looking for a reliable replacement LED driver in Malaysia? The IMITOS LED Power Supply 4-7×1W (Model: TX-WP002) is a premium-grade constant current electrical transformer engineered to power 4W to 7W LED downlights, eyeball casings, and spotlights. Operating on a universal input voltage of 100V-240VAC and providing a stabilized DC320mA output (14V-25V), this highly durable electronic ballast prevents light flickering, safeguards against power surges, and significantly extends the lifespan of your ceiling lights. Ideal for DIY residential repairs and professional electrical maintenance.
Full Description:
When it comes to maintaining energy-efficient lighting systems in Malaysian homes and offices, the driver is the most crucial component. The IMITOS LED Power Supply 4-7×1W (TX-WP002) acts as the heart of your lighting fixtures, converting volatile alternating current (AC) into stable direct current (DC). If your living room downlight, kitchen eyeball light, or shop lot spotlight starts flickering or fails to turn on entirely, you don't necessarily need to replace the whole light fixture—swapping out the old transformer with this high-quality IMITOS LED driver is often the easiest, most cost-effective solution.Engineered with premium internal circuitry, this constant current module is specifically calibrated to drive a series of 4 to 7 single-watt (1W) LED chips. It is a highly sought-after component among local wiremen, electrical contractors, and DIY enthusiasts looking for long-lasting performance and compatibility with major lighting brands in Malaysia.
Key Features & Built-In Fail-Safes
-
True Constant Current Delivery: Emitting a steady DC320mA across an output range of 14V-25V, this power supply guarantees uniform brightness across all connected LEDs. It dynamically balances the voltage shifts that occur as semi-conductors heat up, preventing thermal runaway.
-
Universal Input Compatibility (Wide AC Range): Built to withstand fluctuations in local electrical grids, the TX-WP002 seamlessly accepts input ranges from 100V up to 240VAC (50/60Hz), ensuring reliable power even during mild voltage drops.
-
Advanced Thermal Management: Designed to excel in tropical climates like Malaysia, the device features a maximum ambient operating temperature (Ta) of 45°C and an ultra-safe maximum case temperature (Tc) threshold of 75°C.
-
Comprehensive Circuit Protection: Never worry about electrical hazards. The driver comes integrated with automated defense systems protecting against short circuits, over-current spikes, and unexpected power surges.
Installation Guidelines & Maintenance Tips
Replacing your broken lighting component with the IMITOS TX-WP002 LED power supply requires only basic tools, but safety should always be the top priority:
-
Cut the Power: Always switch off the main circuit breaker (MCB) at your distribution board before handling any exposed wiring.
-
Identify the Terminals: Connect your home’s main AC power lines (Live and Neutral) to the primary input side marked PRI (100V-240VAC). Polarity here is highly forgiving.
-
Connect the Load: Wire the secondary output side marked SEC (DC320mA) directly to your LED light terminal. Ensure you match the positive (+) and negative (-) leads correctly to avoid damaging the LED chips.
-
Secure and Clean: Tuck the slim casing neatly inside your plaster ceiling space or eyeball housing. Keep it away from localized heat sources or areas prone to high moisture to ensure it operates comfortably well below its 75°C structural limit.
Specification:
- Model: TX-WP002
- Power: 4-7×1W
- PRI: 100V-240VAC 50/60Hz
- SEC: Constant Current: DC320mA 14V-25V
- Ta: 45°C
- Tc: 75°C
Q1: What does "4-7x1W" mean on the IMITOS LED power supply?
A: The "4-7x1W" specification indicates that this driver is designed to power a series connection of minimum 4 and maximum 7 individual 1-Watt LED chips. It provides a total output power output ranging roughly from 4W to 7W.
Q2: Why is my LED downlight flickering in my living room, and will this fix it?
A: LED flickering is almost always caused by a failing or degraded internal power driver rather than the bulb itself. Replacing your old, faulty unit with the stable IMITOS TX-WP002 driver will instantly resolve flickering and strobe issues.
Q3: Can I use a DC320mA constant current driver if my old one was 300mA?
A: Yes, a minor difference like 320mA instead of 300mA is generally safe and compatible for most standard Malaysian downlights. It might make your LEDs run marginally brighter without overheating the fixture components.
Q4: Is the IMITOS TX-WP002 driver suitable for 12V LED strip lights?
A: No, it is not.
LED strip lights require a Constant Voltage (usually fixed 12V or 24V) driver. The IMITOS TX-WP002 is a
Constant Current driver (outputting 14V-25V dynamically) meant explicitly for downlights and spotlights.
Q5: What is the difference between constant current and constant voltage LED drivers?
A: Constant current drivers (like the TX-WP002) vary the voltage to maintain a fixed electrical current, making them ideal for single high-power bulbs like downlights.
Constant voltage drivers maintain a fixed voltage (e.g., 12V) and are used for multi-bulb systems like strips.
Q6: What happens if I connect a 3W LED light to a 4-7W IMITOS driver?
A: We strongly advise against this. Because a 3W light operates below the driver's minimum rated threshold voltage (14V), the driver may under-voltage or over-drive the circuit, causing the light to flash or burn out permanently.
Q7: What do Ta 45°C and Tc 75°C mean on the product casing?
A:Ta (Ambient Temperature) means the driver can safely operate in surrounding air up to 45°C. Tc (Case Temperature) is the maximum structural temperature the outer casing can safely reach (75°C) before performance drops or safety risks occur.
Q8: Can I install this IMITOS LED power supply inside a bathroom ceiling?
A: Yes, provided it is housed completely inside a sealed, dry ceiling cavity or a splash-proof fixture. The driver itself is designed for indoor ambient use and should not be directly exposed to steam, water droplets, or leaks.
Q9: Does the IMITOS TX-WP002 support smart dimming switches in Malaysia?
A: No, the IMITOS TX-WP002 is a standard non-dimmable electronic power supply. Connecting it to a standard trailing-edge or leading-edge dimmer switch will cause rapid flickering and will permanently damage the driver.
Q10: Where can I buy original IMITOS lighting components in Malaysia?
A: Original IMITOS products are widely distributed through authorized lighting retailers in Selangor and KL, specialized electrical wholesale shops, and official online storefronts on Shopee Malaysia and Lazada.
