Share:
BSLight T8 IP65 Anti Corrosive Fitting 2×4ft | BCR/ECO/240 (ECO Series)
The BSLight T8 IP65 Anti Corrosive Fitting 2×4 Feet (Model: BCR/ECO/240) is a heavy-duty, commercial-grade lighting enclosure engineered to withstand Malaysia’s most demanding industrial environments.
Full Description:
When it comes to outfitting industrial facilities, commercial spaces, or damp outdoor locations across Malaysia, ordinary light fixtures simply won’t cut it. Fluctuations in humidity, heavy tropical downpours, coastal salt air, and airborne dust rapidly degrade standard electrical casings. Enter the BSLight T8 IP65 Anti Corrosive Fitting 2×4 Feet (BCR/ECO/240).
True Ingress Protection: Certified IP65 Weatherproofing
The defining advantage of the BCR/ECO/240 model is its certified IP65 rating. In the international standards classification, an IP65 grade guarantees that the interior components are completely dust-tight against micro-particles and tightly sealed against low-pressure water jets from any direction. Unlike cheap alternatives that use glued foam tape, BSLight incorporates an advanced manufacturing technique where polyurethane gaskets are directly injected into the lamp body. This creates an uninterrupted, continuous seal that maintains its physical integrity year after year, preventing moisture entry, tropical condensation build-up, and bug infestations inside the casing.
Built with Premium Polycarbonate Body & Diffuser
Extreme durability requires high-quality materials. Both the base chassis and the light diffuser of this 2x4 feet fixture are manufactured from high-impact Polycarbonate (PC).
-
Polycarbonate Base Body: Offers exceptional chemical resistance, structural rigidity, and heat deflection. It will not warp under the high ambient temperatures common in Malaysian industrial zones.
-
Polycarbonate Diffuser: Specifically formulated with UV-stabilized inhibitors.
Standard plastics turn yellow and brittle when exposed to sunlight or intense UV rays over time, reducing light transmission. The BSLight diffuser remains crystal clear, ensuring maximum lumen output and uniform light dispersion across your floor plan.
Smart Dimensions & Streamlined Normal LED Wiring
With physical dimensions of 1265 mm (Length) × 105 mm (Width) × 90 mm (Height), this fixture fits cleanly into standard industrial structural frameworks. The generous width profile accommodates two 4-foot T8 LED tubes placed side-by-side to deliver double the brightness from a single wiring drop point.Engineered with Normal LED Wiring, the BCR/ECO/240 simplifies your electrical installation or upgrading process. It bypasses the need for outdated, energy-wasting magnetic ballasts and starters. Contractors can easily wire the fixture directly to the standard 240V, 50Hz Malaysian grid mains. This direct-to-mains layout slashes installation time, eliminates future component failure points, and maximizes energy savings when converting from old fluorescent tubes to LED retrofits.
Target Applications Across Malaysia
The robust construction makes this T8 anti-corrosive casing highly versatile. It is highly recommended for:
-
Industrial Warehouses & Production Floors: Withstands heavy dust, vibrations, and continuous operational shifts.
-
Multi-tier Basements & Commercial Parking Garages: Resists automotive exhaust fumes, constant dampness, and running water pipes.
-
Loading Bays, Canopies & Walkways: Stands up to outdoor rain blasting, wind, and fluctuating outdoor humidity levels.
-
Coastal & Food Processing Areas: The non-corrosive polycarbonate housing will not rust or flake when exposed to salty air or chemical cleaning agents.
Specifications
- Model: BCR/ECO/240
- Size Ø (FT): 2×4 Feet
- Base Body / Diffuser: Polycarbonate
- LED Wiring: Normal
- Size L×W×H (mm): 1265 × 105 × 90
- IP Rating: IP65
Q1: What does an IP65 rating mean for a T8 lighting fitting in Malaysia?
A: An IP65 rating means the casing is completely dust-tight (IP6X) and protected against low-pressure water jets or heavy rain from any angle (IPX5).
Q2: Can I install standard T8 fluorescent tubes inside the BSLight BCR/ECO/240?
A: No. The BSLight BCR/ECO/240 features "Normal LED Wiring," meaning it is pre-wired to accept modern, double-ended or single-ended T8 LED tubes operating directly on 240V mains power without a ballast or starter.
Q3: What is the benefit of a polycarbonate diffuser over acrylic or glass?
A: Polycarbonate is highly impact-resistant and virtually unbreakable compared to glass or acrylic. Furthermore, the BSLight diffuser is UV-protected, meaning it won’t turn yellow or brittle when exposed to the harsh Malaysian sun.
Q4: Where can I use anti-corrosive light fittings in Malaysia?
A:They are ideal for harsh environments prone to moisture, dust, or chemicals.
Q5: What are the exact dimensions of the BSLight BCR/ECO/240 casing?
A: The physical dimensions are 1265 mm in length, 105 mm in width, and 90 mm in height, perfectly matching standard industrial layouts for 4ft dual configurations.
Q6: How does the gasket seal work on the BSLight BCR/ECO series?
A: BSLight uses an advanced continuous injected polyurethane gasket directly molded into the housing channels. This provides a seamless, airtight barrier that keeps moisture and insects out permanently.
Q7: Is this light fitting suitable for outdoor coastal applications?
A:Yes. Because its entire outer body and diffuser are made of non-metallic polycarbonate, it is highly resistant to saltwater corrosion and sea spray, making it popular for coastal Malaysian facilities.
.png)
A: An IP65 rating means the casing is completely dust-tight (IP6X) and protected against low-pressure water jets or heavy rain from any angle (IPX5).
Q2: Can I install standard T8 fluorescent tubes inside the BSLight BCR/ECO/240?
A: No. The BSLight BCR/ECO/240 features "Normal LED Wiring," meaning it is pre-wired to accept modern, double-ended or single-ended T8 LED tubes operating directly on 240V mains power without a ballast or starter.
Q3: What is the benefit of a polycarbonate diffuser over acrylic or glass?
A: Polycarbonate is highly impact-resistant and virtually unbreakable compared to glass or acrylic. Furthermore, the BSLight diffuser is UV-protected, meaning it won’t turn yellow or brittle when exposed to the harsh Malaysian sun.
Q4: Where can I use anti-corrosive light fittings in Malaysia?
A:They are ideal for harsh environments prone to moisture, dust, or chemicals.
Q5: What are the exact dimensions of the BSLight BCR/ECO/240 casing?
A: The physical dimensions are 1265 mm in length, 105 mm in width, and 90 mm in height, perfectly matching standard industrial layouts for 4ft dual configurations.
Q6: How does the gasket seal work on the BSLight BCR/ECO series?
A: BSLight uses an advanced continuous injected polyurethane gasket directly molded into the housing channels. This provides a seamless, airtight barrier that keeps moisture and insects out permanently.
Q7: Is this light fitting suitable for outdoor coastal applications?
A:Yes. Because its entire outer body and diffuser are made of non-metallic polycarbonate, it is highly resistant to saltwater corrosion and sea spray, making it popular for coastal Malaysian facilities.
Specifications
Sorry, currently do not have any video uploaded.
