The BSLight T8 IP65 Anti Corrosive Fitting (ECO Series) 2×2 (Model: BCR/ECO/220) is a heavy-duty, commercial-grade twin 2-feet T8 LED casing engineered specifically for Malaysia’s humid, dusty, and harsh industrial environments. Featuring a premium UV-protected full polycarbonate body and diffuser alongside an injected seamless rubber gasket, it boasts a certified IP65 waterproof and dust-tight rating. Built with normal LED wiring to house two energy-efficient 2ft T8 LED tubes, this compact 660mm luminaire provides excellent high-impact resistance for car parks, loading bays, kitchens, and factories across Malaysia.

The core asset of this industrial ceiling fitting is its strict IP65 Ingress Protection rating. During manufacturing, flexible sealing gaskets are injected directly into the lamp body to form a completely continuous, airtight seal. This seamless barrier provides ultimate protection against jet water blasting, directional rain splashes, heavy fine dust accumulation, and destructive insect penetration. This design is perfect for open-air environments like transit bays or wet-washed food production areas where regular cleaning or damp conditions easily destroy low-grade light casings.  
 

The internal design features a safe and reliable Normal LED Wiring configuration engineered to support modern T8 LED tubes. By bypassing obsolete, energy-draining magnetic ballast and starter configurations, users can transition cleanly to power-saving LED retrofits while minimizing heat generation within the fully enclosed casing. The physical dimension profile of the fitting measures precisely 660mm (Length) × 105mm (Width) × 90mm (Height). This optimized structural envelope maximizes internal thermal dissipation while remaining compact enough to install effortlessly in tight spaces, under low canopies, or inside specialized electrical trunking networks.  
 

Q1: What is the difference between an IP65 rating and a normal light casing?
A: An IP65 rating signifies that the casing is entirely dust-tight and fully protected against low-pressure water jets from any direction. Normal indoor light casings lack rubber gaskets, leaving open gaps that allow dust, humidity, moisture, and insects to accumulate inside, which can lead to premature electrical short circuits.

Q2: Can I use standard fluorescent tubes in the BSLight BCR/ECO/220 fitting?
A: No, the BCR/ECO/220 is wired exclusively for modern T8 LED tubes with Normal LED wiring configurations. It does not contain the magnetic choke ballast or starter required to run legacy fluorescent lamps, rendering it highly energy-efficient and low maintenance.

Q3: What does "2x2" mean for the BSLight T8 ECO Series fitting?
A:The "2x2" designation means this specific casing is built to house two (2) separate T8 LED tubes, and each tube has a physical length of 2 feet (approximately 600mm).

Q4: Is polycarbonate better than ABS plastic for anti-corrosive light fittings?
A:Yes. Polycarbonate offers significantly higher impact resistance and much stronger UV stability compared to standard ABS plastic. It prevents the fixture body from turning yellow, becoming brittle, or cracking under hot Malaysian weather and harsh industrial UV exposure.

Q5: Where should I install the BSLight T8 IP65 ECO Series BCR/ECO/220?
A:It is ideal for parking areas, loading bays, canopy ceilings, industrial production zones, transit stations, warehouses, commercial kitchens, and any environment subjected to dampness, moisture, or dust.

Q6: How do you mount the BSLight T8 2x2 Anti-Corrosive casing?
A: The fixture is designed for flexible surface mounting directly onto concrete ceilings, walls, or architectural under-canopy structures. It can also be easily suspended via pendant mounting systems depending on the layout of your facility.

Q7: What does "Normal LED wiring" mean on this light fitting specification?
A:Normal LED wiring (sometimes referred to as single-ended or double-ended direct mains wiring) means the electrical path sends power directly to the G13 lamp holders without passing through heavy ballasts, ensuring immediate compatibility with standard LED T8 tubes available in Malaysia.  

Q8: Why is it called an "Anti-Corrosive" fitting?
A:Because it contains zero external exposed sheet-metal parts that can rust. The full polycarbonate body and specialized weather-proof components resist moisture, salt air, and chemical vapors, making it fully rustproof and anti-corrosive.