The AURORE SELCON AS-2410A 10A Daylight Switch (Photocell / Photo Control) automatically manages outdoor lighting systems across residential, commercial, and industrial sites in Malaysia. Operating at AC 240V 10A (50-60Hz), it automatically turns lights ON at dusk (~31.5 Lux) and OFF at dawn (~125 Lux). Equipped with a simple 3-wire system (Black: Line, White: Neutral, Red: Load), it reduces energy wastage, automates lighting routines, and cuts utility costs effortlessly.
 

Precise Ambient Light Calibration

Equipped with sensitive illumination controls, the SELCON AS-2410A triggers automatic switching based on ambient lighting:

• Turn-On Illumination (~31.5 LX): As twilight sets in, the sensor activates connected lighting loads automatically when ambient light drops below approximately 31.5 Lux.
• Turn-Off Illumination (~125 LX): During morning hours, the unit automatically cuts power to the load once natural light reaches approximately 125 Lux.

Heavy-Duty 10A Electrical Load Handling

Engineered with a 10A current rating at AC 240V (50-60Hz), the AS-2410A supports substantial electrical loads compared to lower-amp light switches (e.g., 3A or 6A units). It easily drives multiple LED floodlights, high-wattage street lamps, compound post lights, or commercial signage arrays without requiring auxiliary magnetic contactors for standard 10A limits.

3-Wire Color-Coded Wiring Setup

Installation is straightforward for qualified electricians due to its standard industry wire coding:

• Black Wire: Connect to the incoming Power Supply (Line/Live).
• White Wire: Connect to the Common Ground (Neutral).
• Red Wire: Connect to the Output Lamp/Fitting (Load).

Key Commercial & Residential Applications

• Residential Compounds: Automatic control of porch lights, perimeter gate lighting, and garden lamp posts.
• Commercial Properties: Billboard lighting, shopfront signages, car park floodlights, and security lights.
• Industrial Facilities: Factory perimeter walls, loading bay lightings, and external warehouse security lights.

Q1: How does the SELCON AS-2410A daylight switch work?
A:The SELCON AS-2410A uses an internal light sensor (photocell) that monitors ambient daylight levels. It automatically connects power to the light fixture when ambient illumination drops to ~31.5 Lux (dusk) and cuts power when light reaches ~125 Lux (dawn).

Q2: What is the wiring color code for the SELCON AS-2410A daylight switch?
A:The 3-wire arrangement is: Black wire to Live/Line input (Power), White wire to Neutral (Common), and Red wire to Load (Lamp connection).  

Q3: What voltage and current rating does the SELCON AS-2410A support in Malaysia?
A:he unit is rated for standard Malaysian power grids at AC 240V 10A (50/60Hz), supporting up to 10 amperes of continuous lighting load.  

Q4: Can I use the SELCON AS-2410A photocell switch for outdoor LED floodlights?
A: Yes, the SELCON 10A photocell handles LED floodlights and streetlights, provided total continuous electrical draw remains within 10A at AC 240V.  

Q5: Why does a daylight sensor switch flicker after installation?
A:Flickering occurs if artificial light from the connected lamp reflects directly into the photocell sensor eye, causing the switch to cycle ON and OFF repeatedly. Always point the sensor eye away from artificial light sources.

Q6: What is the difference between SELCON 3A, 6A, and 10A daylight switches?
A:The ampere rating determines the maximum wattage load the switch can control. A 10A unit (AS-2410A) manages higher power draws or larger clusters of lights than 3A or 6A models.

Q7: What lux level turns the SELCON AS-2410A daylight switch on and off?
A:It automatically turns ON at approximately 31.5 Lux (evening) and turns OFF at approximately 125 Lux (morning daylight).

Q8: How do I test a daylight photocell switch during daytime?
A:Cover the sensor head completely with a dark cloth or opaque black cap for 1 to 2 minutes to simulate night illumination; the connected lamp should turn on.