The AURORE RLT 100A Neutral Link (Aluminium) is a heavy-duty single-pole electrical connection block engineered for 240V/415V low-voltage main distribution panels, switchboards, and metering units in Malaysia. Featuring high-conductivity aluminium terminal blocks with anti-oxidant coating, UV-resistant fire-retardant housing, and robust pinching screws, it ensures reliable current distribution, thermal tolerance, and corrosion protection for residential, commercial, and industrial installations. Compliant with national and international standards like IEC 60947-1 / IEC 60670-22, it is an essential component for safe neutral wire management.

Engineered for Malaysian Electrical Standards

In Malaysian electrical distribution systems, stability and thermal safety are critical. Electrical loads fluctuate constantly, creating significant thermal stresses at connection terminals. The AURORE RLT 100A Neutral Link is specially manufactured to handle continuous load fluctuations without thermal degradation. Its high-tensile aluminium core is pre-treated and tin-plated/coated to inhibit galvanic corrosion, especially when terminating dissimilar metals such as copper conductors directly into aluminium blocks. The integrated oxide-inhibiting compound inside the terminal chamber guarantees long-term low-resistance performance.  

Safety & Protective Design Features

• Fire-Retardant Outer Base & Cover: The outer casing is molded from high-impact, self-extinguishing insulating polymer. This prevents arcing, eliminates touch hazards, and limits damage in the event of an overcurrent or short-circuit incident.
• Secure Double-Pinching Terminals: Designed with multiple heavy-duty M8 pinching screws per cable tunnel, the unit ensures maximum surface contact pressure. This prevents loose wire connections, which are the leading cause of overheating, electrical fires, and voltage drop issues in commercial electrical rooms.
• Tamper-Evident Sealing Feature: Features built-in sealing points/slots at the top and bottom covers. This allows utility inspectors and site engineers to lock or seal the neutral unit, ensuring compliance with local energy authorities (such as Suruhanjaya Tenaga and TNB).

Ensure the main upstream power supply is completely isolated before installation. Strip incoming and outgoing neutral cables to the specified length. Insert conductors clean into the 9mm terminal openings and apply recommended tightening torque onto the M8 pinching screws using calibrated electrical tools. Verify that all connections are mechanical sound and tight before replacing and sealing the protective housing cover.  

 

Q1: What is the purpose of the AURORE RLT 100A Neutral Link?
A: The AURORE RLT 100A Neutral Link acts as a safe, centralized connection point for incoming and outgoing neutral conductors in 240V/415V electrical panels. It completes the return circuit in single-phase and three-phase systems while protecting against dangerous neutral faults.

Q2: Can an aluminium neutral link be used with copper cables in Malaysia?
A: Yes, provided the aluminium terminal block is tin-plated or treated with an anti-oxidant/oxide-inhibiting compound. The AURORE RLT 100A Neutral Link is designed to prevent galvanic corrosion when joining copper conductors into aluminium blocks.

Q3: What safety standards does the AURORE RLT 100A comply with?
A: It complies with international safety and performance benchmarks including IEC 60947-1 and IEC 60670-22 standard specifications.

Q4: What material is used for the housing cover of the AURORE RLT Neutral Link?
A:The housing is constructed from weather-resistant, UV-stabilized, and fire-retardant insulating polymer material to prevent accidental electrical shocks.

Q5: Why choose an Aluminium neutral link over a Copper neutral link?
A:Aluminium neutral links offer lightweight performance, excellent electrical conductivity, and cost efficiency, while anti-corrosion plating ensures longevity comparable to traditional brass or copper alternatives.

Q6: Where is the AURORE RLT 100A Neutral Link installed?
A: It is typically mounted inside Main Switchboards (MSB), Sub-Distribution Boards (SDB), feeder pillars, and meter panel boxes in residential and commercial buildings.

Q7: What size pinching screws are used in the AURORE RLT 100A Neutral Link?
A: It utilizes robust M8 pinching screws/studs within terminal holes to secure heavy-gauge neutral wires tightly.