Share:
MW DU240T8 IP66 Weatherproof LED T8 Fitting (4ft 2 Tube)
The PMW DURO LED T8 Weatherproof Fitting (DU240T8) is an IP66-rated, industrial-grade lighting casing engineered for tough, high-moisture environments across Malaysia. Designed for twin 4ft LED T8 tubes, it features a impact-resistant polycarbonate housing, clear diffuser, and stainless steel retention clips for maximum durability and energy efficiency in outdoor, commercial, and industrial facilities.
Full Description:
Heavy-Duty Industrial Lighting for Harsh Environments
The PMW DURO LED T8 Weatherproof Fitting (DU240T8) is built specifically to address the demanding environmental challenges of tropical industrial settings in Malaysia. Dust, humidity, high temperatures, and direct water exposure can quickly compromise standard indoor light fixtures. The DU240T8 light casing is designed to shield electrical components and light sources from these environmental stressors, offering an ideal housing solution for factories, processing plants, car washes, and outdoor commercial facilities.Rugged Construction & Premium Materials
Constructed with a heavy-duty polycarbonate housing and a clear polycarbonate diffuser, the DU240T8 delivers maximum resistance against impacts, chemical contact, UV degradation, and everyday wear. Polycarbonate ensures the fixture remains intact without cracking or warping over years of heavy use. Securing the entire housing unit are 304 stainless steel clips, which provide a tight, lasting mechanical seal that will not rust or degrade when exposed to moisture, coastal air, or chemical vapors.IP66 Weatherproof Protection
Equipped with an IP66 ingress protection rating, this weatherproof fitting provides complete protection against dust penetration and powerful water jets from any direction. Whether installed in exposed open-air loading bays or high-pressure washdown areas, the sealed enclosure prevents water intrusion, short circuits, and early tube failure. This level of protection significantly lowers maintenance costs and downtime associated with frequent bulb or ballast replacements.Dual 4ft Tube Capacity & Optimal Spacing
Designed to accommodate two 4ft (1200mm) LED T8 tubes, the DU240T8 doubles your light output without requiring additional wiring points or ceiling mounts. Its physical dimensions—1270mm (L) x 140mm (W) x 100mm (H) with a standardized 905mm fixing distance (LF)—allow for straightforward retrofits and quick surface-mount or suspension installations. The clear polycarbonate diffuser spreads light evenly, minimizing glare while maximizing total lumen delivery across large open floors or tight utility corridors.Ideal Applications Across Malaysia
-
Industrial Facilities: Manufacturing floors, chemical storage, warehouses, and assembly bays.
-
Commercial Premises: Multi-storey car parks, commercial washrooms, utility rooms, and exterior walkways.
- Agriculture & Outdoor: Livestock sheds, greenhouses, food processing plants, and covered outdoor loading docks.
Specification:
- Product Code: 01.DU240T8.00
- Model Code: DU240T8
- Tube Capacity: 2 Tube (4ft)
- Length (L) : 1270mm
- Width (W): 140mm
- Height (H): 100mm
- Fixing Distance (LF): 905mm
- IP Rating: IP66
- Housing Material: Polycarbonate
- Diffuser Material: Clear Polycarbonate
- Clips Material: Stainless Steel
Q1: What is the IP rating of the PMW DURO DU240T8 weatherproof fitting?
A: The PMW DURO DU240T8 has an IP66 rating, meaning it is completely dust-tight and fully protected against high-pressure water jets from any direction.
Q2: How many LED T8 tubes can the DU240T8 fitting hold?
A: This model is built to house two 4ft (1200mm) LED T8 tubes, providing dual-tube illumination from a single fixture.
Q3: What materials are used in the construction of the DU240T8?
A: The body and clear diffuser are made from high-impact polycarbonate, while the securing latch clips are made from rust-resistant stainless steel.
Q4: Is the PMW DU240T8 fitting suitable for outdoor use in Malaysia?
A: Yes, the combination of UV-resistant polycarbonate and IP66 water protection makes it ideal for outdoor and semi-exposed areas in high-humidity tropical climates.
Q5: What are the exact dimensions of the DU240T8 weatherproof fitting?
A: The unit measures 1270mm in length, 140mm in width, and 100mm in height, with a mounting fixing distance of 905mm.
Q6: Does the DU240T8 come with LED T8 tubes included?
A: No, the DU240T8 is a weatherproof housing (fitting only). LED T8 tubes must be purchased separately according to your preferred color temperature (3000K, 4000K, or 6500K) and wattage.
Q7: Can this fitting be installed in car washes or high-moisture facilities?
A: Yes, the IP66 rating and stainless steel clips make it safe and effective for high-moisture environments such as car washes, cold storage facilities, and food processing plants.
Q8: What is the advantage of clear polycarbonate diffusers over frosted ones?
A: Clear polycarbonate diffusers allow maximum light transmittance, providing bright, unfiltered illumination suited for industrial spaces where high visibility is critical.
Q9: How do stainless steel clips benefit this weatherproof light fitting?
A: Unlike plastic clips that degrade, snap, or become brittle over time due to UV and heat exposure, stainless steel clips maintain a tight water seal indefinitely and will not rust.
Q10: Is the DU240T8 easy to replace or retrofit into existing light setups?
A: Yes, with a standard 905mm fixing distance and surface-mounting capability, it easily replaces older 2x4ft fluorescent or LED weatherproof fittings.
.png)
.png)
Specifications
Sorry, currently do not have any video uploaded.
