Share:
PMW LED T8 Tube (VEGAS REFLECTOR Series) - Angle Aluminium Mirror Reflector (AAR) - VER140T8
Brand: PMW
PMW 4ft T8 LED Reflector VER140T8 Malaysia
The PMW LED T8 Tube VEGAS Reflector Series (Model: VER140T8 / Product Code: 01.VEAAR140T8.00) is an industrial-grade, surface-mounted linear lighting fixture casing engineered specifically for a single 4ft (1220mm) LED T8 tube. Featuring an Angle Aluminium Mirror Reflector (AAR), this unit redirects upward light loss downward and sideways at an optimized directional angle, maximizing usable lumens for commercial, retail, warehouse, and display applications. Built with an IP20 rating for indoor spaces, its high-spec mirror-finish reflector provides crisp, glare-controlled illumination across aisles, task bays, and display walls throughout Malaysia.
Full Description:
Angle Aluminium Mirror Reflector (AAR) Technology
Standard bare channel T8 fittings scatter illumination in a wide 360-degree spread, wasting light on overhead structures or unpainted ceiling concrete. The PMW VEGAS VER140T8 solves this issue by incorporating a specialized Angle Aluminium Mirror Reflector (AAR). Constructed from high-reflectivity mirror aluminium, the angular wing catches ambient scatter and focuses intense, directional illumination right onto targeted work surfaces, shelf racks, or display boards. This optical design increases downward Lux levels while significantly reducing visual glare for operators and store patrons.
Optimized for Direct-Wire LED T8 Retrofits
Built to match modern Malaysian commercial lighting standards, this casing is designed for direct AC LED T8 tubes. By operating without legacy magnetic ballasts or fluorescent starters, it reduces maintenance overhead, prevents premature tube failure, and avoids annoying flickers. The fixture is fully compatible with standard single-ended or double-ended direct AC input 4ft LED T8 tubes widely supplied in the local market.Versatile Indoor Commercial Applications
With its IP20 ingress protection, the PMW VEGAS VER140T8 fitting excels in clean, dry indoor spaces that require directional linear illumination:
- Retail Supermarkets & Shoplots: Direct light straight onto display shelves, gondolas, and wall banners to highlight merchandise details.
- Industrial Warehouses & Logistics Bays: Mount on storage rack aisles to channel bright task light downward into picking corridors.
- Commercial Offices & Conference Rooms: Position near whiteboards, feature walls, or perimeter corridors for targeted accent and task lighting.
- Manufacturing Facilities & Electronics Workbenches: Deliver shadow-free directional task lighting for precise assembly tasks.
Specification:
- Product Code:01.VEAAR140T8.00
- Model Code: VER140T8
- Description: VEGAS 1XTLED ANGLE ALUMINIUM MIRROR REFLECTOR ONLY
- Reflector Type: Angle Aluminium Mirror (AAR)
- Tube Capacity: 1 Tube (4ft)
- Length (L) : 1220mm
- Base Width (W): 50mm
- Base Height (H): 37mm
- Total Width (W1): 125mm
- Total Height (H1): 79mm
- IP Rating: IP20
- Body Material: Cold-Rolled Steel
Q1: What is the PMW VEGAS VER140T8 light casing used for?
A: The PMW VEGAS VER140T8 is a 4ft single-tube LED T8 casing fitted with an Angle Aluminium Mirror Reflector (AAR).
Q2: Does the PMW VER140T8 T8 reflector fitting come with an LED tube included?
A: No, the model code VER140T8 (Product Code: 01.VEAAR140T8.00) refers to the reflector casing fitting only. You must purchase a standard 4ft (1220mm) LED T8 tube separately to complete the installation.
Q3: What is the advantage of an Angle Aluminium Mirror Reflector (AAR) over standard T8 casings?
A: An Angle Aluminium Mirror Reflector (AAR) uses high-reflectivity mirror aluminium to bounce scattered light in a controlled direction.
Q4: Is the PMW VER140T8 T8 fitting waterproof?
A: No, the PMW VER140T8 has an IP20 rating. This means it is protected against solid objects larger than 12.5mm but has no protection against water or heavy humidity. It should only be installed in dry indoor spaces.
Q5: Does this PMW T8 reflector fixture require a starter or ballast?
A: No, modern PMW T8 LED casings operate on a direct-AC wiring setup without starters or ballasts.
Q6: How is the PMW VEGAS VER140T8 reflector casing mounted?
A:The VER140T8 features a surface-mounting base structure.
Q7: Can I use this 4ft PMW reflector casing with standard 2ft or double tube setups?
A: No, the VER140T8 model is specifically engineered for a single 4ft (1220mm) LED tube. For 2ft tubes or dual-tube setups, you need the corresponding VEAAR120T8 (2ft single) or VEAAR240T8 (4ft double) models.
Q8: Where can I buy original PMW VEGAS VER140T8 fittings in Malaysia?
A: PMW VEGAS fittings are widely available through authorized industrial electrical distributors, LED lighting suppliers in Selangor/KL, and online B2B lighting platforms across Malaysia.
Q9: Why is aluminium mirror reflector better than white powder-coated reflectors?
A: Mirror-finish aluminium provides a significantly higher light reflectance factor than white painted steel. It creates sharp, directional light distribution without discolouring or yellowing under heat over time.
.png)
.png)
.png)
A: The PMW VEGAS VER140T8 is a 4ft single-tube LED T8 casing fitted with an Angle Aluminium Mirror Reflector (AAR).
Q2: Does the PMW VER140T8 T8 reflector fitting come with an LED tube included?
A: No, the model code VER140T8 (Product Code: 01.VEAAR140T8.00) refers to the reflector casing fitting only. You must purchase a standard 4ft (1220mm) LED T8 tube separately to complete the installation.
Q3: What is the advantage of an Angle Aluminium Mirror Reflector (AAR) over standard T8 casings?
A: An Angle Aluminium Mirror Reflector (AAR) uses high-reflectivity mirror aluminium to bounce scattered light in a controlled direction.
Q4: Is the PMW VER140T8 T8 fitting waterproof?
A: No, the PMW VER140T8 has an IP20 rating. This means it is protected against solid objects larger than 12.5mm but has no protection against water or heavy humidity. It should only be installed in dry indoor spaces.
Q5: Does this PMW T8 reflector fixture require a starter or ballast?
A: No, modern PMW T8 LED casings operate on a direct-AC wiring setup without starters or ballasts.
Q6: How is the PMW VEGAS VER140T8 reflector casing mounted?
A:The VER140T8 features a surface-mounting base structure.
Q7: Can I use this 4ft PMW reflector casing with standard 2ft or double tube setups?
A: No, the VER140T8 model is specifically engineered for a single 4ft (1220mm) LED tube. For 2ft tubes or dual-tube setups, you need the corresponding VEAAR120T8 (2ft single) or VEAAR240T8 (4ft double) models.
Q8: Where can I buy original PMW VEGAS VER140T8 fittings in Malaysia?
A: PMW VEGAS fittings are widely available through authorized industrial electrical distributors, LED lighting suppliers in Selangor/KL, and online B2B lighting platforms across Malaysia.
Q9: Why is aluminium mirror reflector better than white powder-coated reflectors?
A: Mirror-finish aluminium provides a significantly higher light reflectance factor than white painted steel. It creates sharp, directional light distribution without discolouring or yellowing under heat over time.
Specifications
Sorry, currently do not have any video uploaded.
