Share:
PMW 2ft Twin T8 LED Reflector Casing VER220T8
The PMW VEGAS Full Metal Reflector (FMR) Series (Model: VER220T8) is a commercial-grade, surface-mounted 2x2ft LED T8 double-tube casing fixture. Built with a heavy-duty cold-rolled steel body and an integrated Full Metal Reflector (FMR), this IP20-rated casing is engineered to maximize directional downward lighting while eliminating wasted ceiling spill. Purpose-built for high-efficiency commercial and industrial installations across Malaysia, the VER220T8 accommodates two 2-foot (610mm) T8 LED direct-wire tubes, providing superior structural rigidity, optimal thermal management, and maximum lux output for retail displays, hypermarket aisles, warehouses, and industrial task areas. (Casing only; LED T8 tubes sold separately).
Full Description:
High-Performance Directional Lighting for Malaysian Commercial Spaces
In commercial and industrial facilities, ambient ceiling light often goes wasted without proper optic direction. The PMW VEGAS VER220T8 LED T8 Reflector Casing solves this challenge by integrating a Full Metal Reflector (FMR) into a dual-tube 2ft bare channel housing. Designed to focus lumen distribution downward, this specialized fixture increases usable lux output on task surfaces without drawing extra electrical wattage. Whether retrofitting older fluorescent fixtures or outfitting new commercial construction in Malaysia, the PMW VER220T8 delivers an economical, energy-efficient housing platform built for maximum optical output.Premium Cold-Rolled Steel Construction
Durability is critical for long-term electrical infrastructure. The chassis of the PMW VEGAS VER220T8 is precision-fabricated from high-grade cold-rolled steel. Unlike standard lightweight aluminum or plastic casings that warp under heat, cold-rolled steel delivers exceptional mechanical strength, heat dissipation, and dimensional stability. Finished with a protective powder coating, the body resists physical impacts, continuous mechanical vibrations, and general environmental wear, making it suitable for demanding factory assembly lines, commercial kitchens, and busy logistics hubs.Optimized Dual-Tube (2x2ft) Optics & Dimensions
The VER220T8 model is purpose-built to hold two standard 2-foot (610mm) T8 LED tubes in parallel. Featuring a compact base channel width of 50mm and height of 37mm, the unit expands to a broad 210mm total width (W1) across the full reflector hood. This expanded profile provides calculated optical coverage, spreading uniform light across workstations, retail racks, and aisle walkways. The total fitting height of 87mm offers a clean, low-profile architectural look when surface-mounted on concrete slabs, plaster ceilings, or overhead cable trunking systems.Direct AC Wiring & Maintenance-Free Operation
Eliminate the ongoing maintenance costs associated with outdated fluorescent ballasts and starters. The PMW VEGAS VER220T8 operates as a dedicated bare channel LED fixture with zero starter holes or unnecessary internal components. It supports direct AC input wiring for single-ended or double-ended T8 LED tubes. By removing traditional points of electrical failure, M&E contractors and facility managers reduce maintenance cycles while optimizing total energy efficiency.Indoor Protection & Commercial Applications
Carrying an IP20 ingress protection rating, the casing is protected against solid foreign bodies larger than 12.5mm, making it ideal for indoor, dry commercial and light industrial environments:- Retail Displays & Supermarkets: Directs high-intensity downward light straight onto gondola shelves, improving product presentation and visual appeal.
- Industrial Workbenches & Assembly Lines: Eliminates harsh shadows and visual strain over assembly stations and quality inspection tables.
- Warehouses & Storage Mezzanines: Delivers high vertical illuminance down narrow storage aisles and under low-clearance mezzanine floors.
- Offices & Commercial Premises: Provides focused task lighting above workstations, storage rooms, and utility corridors.
Specification:
- Product Code:01.VEFMR220T8.00
- Model Code: VER220T8
- Description: VEGAS 2XTLED FULL METAL REFLECTOR ONLY
- Reflector Type: Full Metal Reflector (FMR)
- Tube Capacity: 2 Tube (2ft)
- Length (L) : 610mm
- Base Width (W): 50mm
- Base Height (H): 37mm
- Total Width (W1): 210mm
- Total Height (H1): 87mm
- IP Rating: IP20
- Body Material: Cold-Rolled Steel
Q1: What is the PMW VER220T8 LED T8 casing used for?
A:The PMW VER220T8 is a 2-foot commercial surface-mounted light fitting equipped with a Full Metal Reflector (FMR).
Q2: Are LED T8 tubes included with the PMW VER220T8 fitting?
A: No, the PMW VEGAS VER220T8 is sold as a reflector casing/housing fixture only.
Q3: What is the benefit of a Full Metal Reflector (FMR) over standard bare fittings?
A: A Full Metal Reflector captures upward and lateral light that would normally bounce off ceilings and redirect it straight down into the task area, significantly increasing surface lux levels without adding electricity costs.
Q4: Can the PMW VER220T8 reflector fitting be installed outdoors?
A: No. The PMW VER220T8 carries an IP20 rating, which means it is designed strictly for dry indoor environments such as offices, retail stores, and covered warehouses.
Q5: What material is the PMW VER220T8 body made of?
A: The primary chassis is constructed from high-durability cold-rolled steel, providing structural strength, thermal dissipation, and resistance to warping.
Q6: What are the exact dimensions of the PMW VER220T8 casing?
A: The unit measures 610mm in length, with a 50mm base width and 37mm base height.
Q7: Does the PMW VER220T8 require a starter or ballast?
A: No. The PMW VEGAS series is a direct-wire LED fitting built without starters or ballasts, allowing direct AC power connection to LED tubes to reduce points of failure.
Q8: How is the PMW VER220T8 reflector fixture mounted?
A: It is designed for surface-mounted installation directly onto concrete ceilings, plaster ceilings, plasterboard, or overhead electrical trunking channels.
Q9: Where to buy PMW LED T8 reflector fittings in Malaysia?
A: PMW T8 reflector casings can be purchased through authorized electrical wholesalers, M&E suppliers, commercial lighting distributors, and specialized B2B e-commerce platforms across Malaysia.
.png)
.png)
.png)
A:The PMW VER220T8 is a 2-foot commercial surface-mounted light fitting equipped with a Full Metal Reflector (FMR).
Q2: Are LED T8 tubes included with the PMW VER220T8 fitting?
A: No, the PMW VEGAS VER220T8 is sold as a reflector casing/housing fixture only.
Q3: What is the benefit of a Full Metal Reflector (FMR) over standard bare fittings?
A: A Full Metal Reflector captures upward and lateral light that would normally bounce off ceilings and redirect it straight down into the task area, significantly increasing surface lux levels without adding electricity costs.
Q4: Can the PMW VER220T8 reflector fitting be installed outdoors?
A: No. The PMW VER220T8 carries an IP20 rating, which means it is designed strictly for dry indoor environments such as offices, retail stores, and covered warehouses.
Q5: What material is the PMW VER220T8 body made of?
A: The primary chassis is constructed from high-durability cold-rolled steel, providing structural strength, thermal dissipation, and resistance to warping.
Q6: What are the exact dimensions of the PMW VER220T8 casing?
A: The unit measures 610mm in length, with a 50mm base width and 37mm base height.
Q7: Does the PMW VER220T8 require a starter or ballast?
A: No. The PMW VEGAS series is a direct-wire LED fitting built without starters or ballasts, allowing direct AC power connection to LED tubes to reduce points of failure.
Q8: How is the PMW VER220T8 reflector fixture mounted?
A: It is designed for surface-mounted installation directly onto concrete ceilings, plaster ceilings, plasterboard, or overhead electrical trunking channels.
Q9: Where to buy PMW LED T8 reflector fittings in Malaysia?
A: PMW T8 reflector casings can be purchased through authorized electrical wholesalers, M&E suppliers, commercial lighting distributors, and specialized B2B e-commerce platforms across Malaysia.
Specifications
Sorry, currently do not have any video uploaded.
