Schneider Unica X 16AX 1 Gang 2 Way Switch LED
The SCHNEIDER UnicaX Series 16AX 250V 1 Gang 2 Way Switch with LED Indicator (Jet Black) - NUX31_2N_JB is a premium, ultra-slim flush-mounted wall switch engineered for modern residential and commercial interiors in Malaysia. Crafted with a sleek stainless steel plate in Jet Black, this 16AX electromechanical switch allows two-way light control with an integrated soft LED locator for effortless nighttime operation. Certified to international IEC 60669-1 standards with IP20 ingress protection, it delivers safe, heavy-duty lighting control for homes, condominiums, and offices.
Full Description:
Premium Jet Black Aesthetic & Stainless Steel Durability
Upgrade your wall aesthetics with the Schneider UnicaX Series Jet Black 1 Gang 2 Way Switch. Designed to complement contemporary interior architecture, industrial themes, and minimalist spaces, the Unica X series combines aesthetic sophistication with heavy-duty durability. Featuring a high-quality stainless steel faceplate in a deep, matte-finish Jet Black tint, this wall switch offers resistance against daily wear, fingerprints, and smudges, keeping your home looking modern and pristine.
Dual-Control 2-Way Switching Functionality
A 1 Gang 2-Way Switch allows you to control a single lighting circuit from two separate physical locations. Perfect for staircases, long corridors, large living rooms, and master bedrooms (where you want to turn a light on at the entrance and off right by the bed), the Schneider NUX31_2N_JB provides smooth, tactile electromechanical operation with a single rocker.
High Load Capacity (16AX Rated)
Unlike standard domestic switches rated at 10A, the Schneider Unica X switch carries a higher 16AX 250V~ 50/60Hz rating. The "AX" rating indicates its ability to handle inductive and capacitive electrical loads—making it ideal for modern LED lighting setups, fluorescent tubes, high-wattage chandelier arrays, and energy-efficient lighting grids without risk of contact welding or premature switch failure.
Integrated LED Indicator for Nighttime Visibility
Never fumble in the dark looking for a light switch again. The built-in LED indicator projects a soft visual signal, allowing homeowners, hotel guests, or office staff to easily locate the switch in pitch-black rooms or dimly lit hallways. The energy-efficient LED remains long-lasting and consumes minimal power.
Safe, Certified Flush-Mount Installation
Designed for standard flush-mounting wall backboxes, the Schneider UnicaX NUX31_2N_JB seamlessly fits flat against interior walls. It complies rigorously with IEC 60669-1 safety standards and holds official IEC certifications, delivering full peace of mind regarding electrical safety, short-circuit protection, and insulation reliability.
Specification:
- Catalogue Number: NUX31_2N_JB
- Description: 16AX 250V 1 Gang 2 Way Switch with LED, Jet Black
- Range of Product: Unica X
- Product or Component type: Switch
- Technology Type: Electromechanical
- Switch Function: 2 Way
- Number of rocker: 1
- Colour Tint: Jet Black
- Rated Current: 16 AX
- Rated Operational Voltage: 250 V
- Network Frequency: 50/60Hz
- Material: Stainless Steel
- Device Mounting: Flush Switches
- Standards: IEC 60669-1
- Product Certifications: IEC
- IP Degree of Protection: IP20
Q1: What is the difference between a 1-way and 2-way light switch?
A: A 1-way switch controls a light fitting from a single wall location. A 2-way switch allows you to control the same light fitting from two different locations (such as the top and bottom of a staircase, or both sides of a room).
Q2: What does "16AX" rating mean on a Schneider wall switch?
A: A 16AX rating means the switch can safely handle up to 16 Amps of electrical current, specifically tested for inductive/fluorescent/LED lighting loads that create high surge currents when switched on.
Q3: Is the Schneider Unica X 1 Gang 2 Way Switch suitable for LED lights?
A: Yes. Due to its high 16AX rating and IEC 60669-1 certification, the Schneider Unica X switch handles the inrush current of modern energy-saving LED drivers and fixtures without arcing or sticking.
Q4: Can I use a 2-way switch as a 1-way switch?
A: Yes. A 2-way switch can be wired to function as a standard 1-way switch simply by connecting to the COM terminal and L1 terminal, leaving the L2 terminal unused.
Q5: What is the purpose of the LED indicator on the Schneider NUX31_2N_JB?
A: The LED indicator serves as a locator light, glowing softly in the dark so you can easily locate the wall switch inside a dark bedroom, hallway, or bathroom at night.
Q6: What wall box is required for flush mounting Schneider Unica X switches in Malaysia?
A: The Schneider Unica X series uses standard flush-mounting concealed backboxes (standard 3x3 inch / 86mm x 86mm metal or PVC backboxes) widely used across residential construction in Malaysia.
Q7: Is the Schneider Unica X Jet Black plate plastic or metal?
A: The Schneider Unica X series (NUX31_2N_JB) features a high-grade stainless steel faceplate finished in Jet Black tint, providing a premium tactile feel compared to basic plastic switches.
Q8: Does this switch have SIRIM or IEC approval for safety in Malaysia?
A: Yes, the Schneider Unica X series complies with IEC 60669-1 international safety standards for household switches, adhering to Suruhanjaya Tenaga (Energy Commission) safety directives for electrical accessories sold in Malaysia.
Q9: Can the Schneider Unica X IP20 switch be installed outdoors?
A: No. The IP20 rating means it is designed strictly for indoor dry locations. For outdoor or exposed rain areas, an IP66 weatherproof enclosure/switch is required.
Q10: Where can I buy original Schneider Unica X switches in Malaysia?
A: Original Schneider Unica X switches (NUX31_2N_JB) are available through authorized Schneider Electric distributors, electrical hardware retailers, and online stores on Shopee MY and Lazada MY.
