UMS 9 Series 10AX 1 Gang Bell Push - 910-B

UMS 9 Series 10AX 1 Gang Bell Push - 910-B

Name: UMS 9 Series 10AX 1 Gang Bell Push - 910-B
Brand: UMS
Availability: InStock

Brand: UMS

Category: 9 SERIES

10AX doorbell switch

UMS 9 Series Switch

UMS Bell Push Switch

1 Gang Bell Push Button Malaysia

UMS Electrical Switch Supplier Malaysia

UMS 9 Series 20A 1 Gang 1 Way DP Switch - 9120

UMS 9 Series 10AX 1 Gang 1 Way SP Switch - 910-1W

UMS 910-B 10AX 1 Gang Door Bell Switch

The UMS 9 Series 10AX 1 Gang Bell Push (Model 910-B) is a SIRIM-approved, premium momentary door bell switch engineered for residential, commercial, and industrial applications in Malaysia. Rated at 10AX 250V A.C., this single-pole switch strictly complies with MS IEC 60669-1, IEC 60669-1, and BS EN 60669-1 safety standards. Featuring a fire-retardant white polycarbonate finish, smooth press feedback, and standard wall box compatibility, the 910-B delivers safety, high electrical endurance, and sleek architectural integration for any entryway.

Full Description:

Upgrading or installing an electrical entryway fitting requires switches built to handle frequent daily press cycles without mechanical fatigue or electrical failure. The UMS 9 Series 10AX 1 Gang Bell Push (910-B) represents the industry standard in Malaysian electrical accessories. Designed by UMS-Neiken, a trusted leader in local manufacturing, this momentary switch is specifically built to operate doorbells, chimes, buzzers, and automated access systems smoothly. Whether you are fitting out a modern modern terrace home, an office reception counter, a retail doorway, or an industrial premises, the UMS 9 Series brings a classic aesthetic that blends seamlessly into standard plaster wall boxes, pattress boxes, and partition walls.

Key Features & Technical Advantage

SIRIM & International Compliance: Fully tested and certified under MS IEC 60669-1, IEC 60669-1, BS EN 60669-1, SS 227-1, and SASO 51/52 standards. It guarantees protection against short-circuiting, electrical surges, and physical wear.
10AX 250V AC Rating: Capable of handling standard residential and commercial AC voltage feeds, providing reliable inductive load handling without arcing or contact fusion.
Momentary Contact Mechanism: Designed with a spring-return mechanism engineered specifically for door chimes, gate bells, and press-to-exit buzzers.
High-Grade Polycarbonate Material: Molded from UV-stabilized, high-impact polycarbonate material that resists yellowing, impact, high heat, and fire hazards over years of continuous use.
Ergonomic & Minimalist Design: Clean white aesthetic featuring a distinct bell symbol printed for clear visual identification by visitors and guests.
Easy Installation: Features standard 60.3mm fixing center dimensions, compatible with standard standard 3x3 flush metal boxes or surface mounting pattress boxes used across Malaysia.

Typical Applications

Residential Entrances: Works with mechanical doorbells, electronic door chimes, and wireless chime transmitter triggers.
Commercial Offices: Functions as a door release switch or reception call bell.
Industrial & Warehouse Facilities: Functions as an entry alert button or signal switch for restricted access doors.

Installation & Safety Guidelines

The UMS 910-B bell push switch should be installed by a licensed Wireman or qualified electrician in accordance with Suruhanjaya Tenaga (Energy Commission Malaysia) regulations. Always turn off main supply at the consumer unit (MCB/DB box) prior to installation. Connect live supply and neutral return leads to their respective brass screw terminals on the back module, ensuring secure wire clamping to maintain full electrical conductivity.

Q1: What is the UMS 9 Series 910-B switch used for?

A: The UMS 9 Series 910-B is a 1 Gang Bell Push switch primarily used to operate doorbells, electronic door chimes, call buzzers, and door access systems in residential and commercial buildings.

Q2: What is the difference between a normal light switch and a bell push switch?

A: A normal light switch stays ON or OFF when toggled (latching), while a bell push switch (like the UMS 910-B) is momentary—it completes the electrical circuit only while pressed and springs back when released.

Q3: Can the UMS 910-B switch handle 240V household current in Malaysia?

A: Yes, the UMS 910-B switch is rated at 10AX 250V AC, making it suitable for standard Malaysian 240V single-phase electrical systems.

Q4: Can I use the UMS 910-B bell push for an auto-gate system?

A: Yes, the UMS 910-B can function as a manual wall-mounted push button trigger to open or close electric auto-gate systems that require dry-contact momentary switching.

Q5: Is the UMS 9 Series 910-B durable for outdoor entrance installation?

A: It is made of high-grade UV-resistant polycarbonate. For indoor or sheltered outdoor installations (under porch overhangs), it handles humidity and heat well; for direct rain exposure, install an IP66 weatherproof enclosure box over it.

Q6: Why does the product code state 10AX rating?

A: The "AX" rating indicates the switch can handle inductive loads (like transformers, chimes, and fluorescent lighting ballasts) without damaging internal electrical contacts during voltage spikes.

Q7: Who manufactures UMS electrical switches in Malaysia?

A: UMS electrical accessories are manufactured by UMS-Neiken Group Berhad, a public-listed Malaysian electrical equipment manufacturer known for producing affordable, high-quality switches and sockets.

Q8: Where can I buy genuine UMS 910-B 1 Gang Bell Push switches in Malaysia?

A: Genuine UMS 910-B bell push switches are available through authorized electrical hardware stores, building materials suppliers, and major Malaysian online retail channels like Shopee and Lazada.

Name*

Email*

Contact Number*

Message (optional)

Specifications

Sorry, currently do not have any product specifications

Sorry, currently do not have any video uploaded.

UMS 9 Series Switch and Socket Catalogue.pdf

231.8 KB