Share:
PMW LED T8 Tube (VEGAS REFLECTOR Series) - Full Aluminium Mirror Reflector (FAR) - VER140T8
Brand: PMW
PMW VEGAS VER140T8 4ft LED Full Mirror Reflector
The PMW LED T8 Tube (VEGAS REFLECTOR Series) VER140T8 is a commercial-grade 1-tube 4ft (1220mm) light fitting casing equipped with a Full Aluminium Mirror Reflector (FAR). Constructed from durable cold-rolled steel with an IP20 ingress rating, this fitting is engineered to maximize light output efficiency, minimize glare, and direct lux precisely where needed. Designed specifically for single 4ft LED T8 tube retrofits or new installations in offices, retail spaces, warehouses, and industrial premises across Malaysia.
Full Description:
High-Efficiency Beam Direction with Full Aluminium Mirror Reflector (FAR)
In commercial and industrial illumination, ambient light loss severely reduces energy efficiency. The PMW VEGAS VER140T8 solves this issue by integrating a precision-engineered Full Aluminium Mirror Reflector (FAR). Unlike standard matte batten casings that scatter light passively, the high-spec specular aluminium mirror directs downward luminaire emissions into a focused, uniform beam spread. This significantly improves lux levels on task areas, workbenches, display aisles, and office desks—allowing facilities managers to achieve higher foot-candle brightness without increasing total energy consumption or tube wattage.
Commercial-Grade Cold-Rolled Steel Construction
Built to withstand long operational hours in commercial environments, the body of the PMW VEGAS VER140T8 is constructed from high-tensile cold-rolled steel. Cold-rolled steel provides superior mechanical strength, dimensional stability, and warping resistance compared to basic plastic or low-grade sheet metals. The structural housing measures 1220mm in length, 50mm base width, and 37mm base height, expanding to a total profile width of 125mm and a total height of 79mm with the reflector assembly attached. This wide 125mm reflector profile ensures maximum light bounce and distribution while maintaining a clean, professional aesthetic on exposed ceilings or suspended mounts.Optimized for Single 4ft LED T8 Tubes
Engineered specifically for single-tube setups (1-Tube / 1XTLED), the VER140T8 housing is tailored for standard 4ft (1220mm) LED T8 tubes. Operating without unnecessary starters or magnetic ballasts, it delivers a direct AC mains connection for modern LED tubes. This streamlined design eliminates flickering, reduces failure points, and simplifies future maintenance—making it a cost-effective solution for large-scale lighting retrofits in Malaysian commercial facilities.Application Versatility & IP20 Rating
Carrying an IP20 ingress protection rating, the PMW VEGAS VER140T8 casing is built for dry, covered indoor applications:- Retail Stores & Supermarkets: Directs focused light onto product shelves and merchandise displays.
- Commercial Offices & Corridors: Provides clean, high-visibility illumination along walkways and workstations.
- Factories & Assembly Lines: Enhances task lighting accuracy for operators working on production tables.
- Warehouses & Storage Facilities: Maximizes vertical shelf illumination in narrow aisles.
- Educational Institutions & Libraries: Offers comfortable, non-glare overhead lighting for classrooms and reading areas.
Specification:
- Product Code: 01.VEFAR140T8.00
- Model Code:VER140T8
- Description: VEGAS 1XTLED FULL ALUMINIUM MIRROR REFLECTOR ONLY
- Reflector Type: Full Aluminium Mirror Reflector (FAR)
- Tube Capacity: 1 Tube (4ft)
- Length (L) : 1220mm
- Base Width (W): 50mm
- Base Height (H): 37mm
- Total Width (W1): 125mm
- Total Height (H1): 79mm
- IP Rating: IP20
- Body Material: Cold-Rolled Steel
Q1: What is the purpose of the Full Aluminium Mirror Reflector (FAR) on the PMW VEGAS VER140T8?
A: The Full Aluminium Mirror Reflector (FAR) acts as a high-efficiency light-directing mirror. It redirects upward and sideways light output from the 4ft LED T8 tube straight downward, increasing downward lux levels and reducing light wastage in commercial and industrial spaces.
Q2: Does the PMW VEGAS VER140T8 fitting include the LED T8 light tube?
A: No, the PMW VER140T8 product package consists of the cold-rolled steel base channel casing and the full aluminium mirror reflector assembly. The 4ft LED T8 tube is purchased separately so you can select your preferred wattage and color temperature (e.g., 6500K Daylight, 4000K Cool White, 3000K Warm White).
Q3: Can I install this PMW T8 reflector casing in outdoor environments?
A:No. The PMW VEGAS VER140T8 carries an IP20 rating, which is designed for indoor, dry environments such as offices, retail outlets, and covered indoor industrial facilities.
Q4: What material is used for the body housing of the PMW VEGAS VER140T8?
A: The base body is manufactured from high-durability cold-rolled steel, providing strong mechanical resistance, anti-warping structure, and long-term stability.
Q5: What are the exact structural dimensions of the PMW VEGAS VER140T8?
A: The base body dimensions are 1220mm (L) x 50mm (W) x 37mm (H). With the full mirror reflector attached, the total overall width is 125mm (W1) and total height is 79mm (H1).
Q6: Is a starter or ballast required to run an LED tube in this casing?
A:No. The PMW VEGAS series is designed for direct-wiring to AC mains for modern LED T8 tubes, eliminating traditional starters and magnetic ballasts for better energy efficiency and easier maintenance.
Q7: What is the main benefit of using a mirror reflector casing over a standard bare batten fitting?
A: Standard bare batten fittings throw light in all directions (360-degree spread), wasting light on the ceiling. A mirror reflector casing bounces unused light back down toward the floor or work surfaces, increasing task area brightness by up to 30%–50% without adding more power consumption.
Q8: Where are PMW LED T8 fittings commonly installed in Malaysia?
A: PMW VEGAS reflector fittings are widely used in commercial shoplots, office corridors, supermarkets, factory production floors, assembly lines, and warehouse racking corridors across Malaysia.
Q9: Where can I buy PMW LED T8 VEGAS series fittings in Malaysia?
A:PMW VEGAS fittings are distributed through authorized Malaysian electrical supply wholesalers, lighting contractors, and e-commerce platforms such as Shopee and Lazada.
.png)
.png)
.png)
A: The Full Aluminium Mirror Reflector (FAR) acts as a high-efficiency light-directing mirror. It redirects upward and sideways light output from the 4ft LED T8 tube straight downward, increasing downward lux levels and reducing light wastage in commercial and industrial spaces.
Q2: Does the PMW VEGAS VER140T8 fitting include the LED T8 light tube?
A: No, the PMW VER140T8 product package consists of the cold-rolled steel base channel casing and the full aluminium mirror reflector assembly. The 4ft LED T8 tube is purchased separately so you can select your preferred wattage and color temperature (e.g., 6500K Daylight, 4000K Cool White, 3000K Warm White).
Q3: Can I install this PMW T8 reflector casing in outdoor environments?
A:No. The PMW VEGAS VER140T8 carries an IP20 rating, which is designed for indoor, dry environments such as offices, retail outlets, and covered indoor industrial facilities.
Q4: What material is used for the body housing of the PMW VEGAS VER140T8?
A: The base body is manufactured from high-durability cold-rolled steel, providing strong mechanical resistance, anti-warping structure, and long-term stability.
Q5: What are the exact structural dimensions of the PMW VEGAS VER140T8?
A: The base body dimensions are 1220mm (L) x 50mm (W) x 37mm (H). With the full mirror reflector attached, the total overall width is 125mm (W1) and total height is 79mm (H1).
Q6: Is a starter or ballast required to run an LED tube in this casing?
A:No. The PMW VEGAS series is designed for direct-wiring to AC mains for modern LED T8 tubes, eliminating traditional starters and magnetic ballasts for better energy efficiency and easier maintenance.
Q7: What is the main benefit of using a mirror reflector casing over a standard bare batten fitting?
A: Standard bare batten fittings throw light in all directions (360-degree spread), wasting light on the ceiling. A mirror reflector casing bounces unused light back down toward the floor or work surfaces, increasing task area brightness by up to 30%–50% without adding more power consumption.
Q8: Where are PMW LED T8 fittings commonly installed in Malaysia?
A: PMW VEGAS reflector fittings are widely used in commercial shoplots, office corridors, supermarkets, factory production floors, assembly lines, and warehouse racking corridors across Malaysia.
Q9: Where can I buy PMW LED T8 VEGAS series fittings in Malaysia?
A:PMW VEGAS fittings are distributed through authorized Malaysian electrical supply wholesalers, lighting contractors, and e-commerce platforms such as Shopee and Lazada.
Specifications
Sorry, currently do not have any video uploaded.
