Share:
PMW T8 LED Angle Metal Reflector VER140T8 | PMW Lighting
The PMW LED T8 Tube VEGAS Reflector Series (VER140T8 / 01.VEAMR140T8.00) is an industrial-grade 1x4ft Angle Metal Reflector (AMR) casing designed for precise, directional linear lighting. Constructed from heavy-duty Cold-Rolled Steel with an IP20 rating, this 1220mm single-tube fixture channels light output downwards and sideways at an angle, eliminating light waste. Ideal for Malaysian factories, warehouses, retail displays, and task lighting setups requiring durable and low-maintenance lighting housing. (Note: Reflector casing fitting only; LED T8 tube sold separately).
Full Description:
Upgrade your industrial and commercial lighting setups with the PMW VEGAS Series Angle Metal Reflector (AMR) Fitting (VER140T8). Engineered specifically to accommodate standard 4ft (1220mm) T8 LED tubes, this fixture provides maximum optical efficiency by redirecting ambient illumination directly toward target areas or vertical wall displays.Manufactured using high-tensile Cold-Rolled Steel, the casing delivers long-term durability and structural rigidity, preventing sag or warping over prolonged commercial operation. Whether you are retrofitting an existing factory floor in Shah Alam, organizing high-bay pallet racking in Penang, or setting up focused wall-wash accent lighting in a retail showroom in Kuala Lumpur, the PMW VER140T8 delivers maximum lumen utilization without visual glare.
Key Features & Commercial Benefits
- Precision Angle Metal Reflector (AMR): Built with a specialized asymmetric angle reflector profile designed to cast light downward and outward at an optimal angle, reducing light spill onto non-essential areas and increasing lux levels on work surfaces.
- Cold-Rolled Steel Construction: High-durability body material engineered to withstand demanding commercial and industrial environments without structural deformation.
- Standard 4ft (1220mm) Compatibility: Custom-built to house 1 x 4ft LED T8 tube (G13 base compatibility), offering a seamless swap for existing linear fittings.
- IP20 Dust Protection Rating: Optimized for clean indoor commercial installations, dry industrial workshops, retail shelving, and covered walkways.
- Sleek Compact Form Factor: Features a streamlined 50mm base width and 79mm overall height, offering low-profile clearance for low ceilings or tight racking spaces.
Applications in Malaysia
- Industrial & Warehousing: Ideal for warehouse aisle lighting, manufacturing assembly lines, and industrial machinery task areas where focused light is required.
- Retail & Commercial Spaces: Perfect for retail shelf illumination, wall-washing displays, and supermarket racking where directional lighting enhances product visibility.
- Office & Architectural Facilities: Excellent for covered walkways, perimeter wall lighting, and maintenance workshops across Malaysia.
Specification:
- Product Code:01.VEAMR140T8.00
- Model Code:VER140T8
- Description: VEGAS 1XTLED ANGLE METAL REFLECTOR ONLY
- Reflector Type: Angle Metal Reflector (AMR)
- Tube Capacity: 1 Tube (4ft)
- Length (L) : 1220mm
- Base Width (W): 50mm
- Base Height (H): 37mm
- Total Width (W1): 125mm
- Total Height (H1): 79mm
- IP Rating: IP20
- Body Material: Cold-Rolled Steel
Q1: What is the PMW VER140T8 LED T8 Angle Metal Reflector used for?
A: The PMW VER140T8 is a 4ft single-tube light casing featuring an Angle Metal Reflector (AMR). It is used in industrial and commercial environments to direct light at a specific angle toward task surfaces, retail shelves, or machinery, preventing light loss and glare.
Q2: What are the exact dimensions of the PMW VER140T8 4ft T8 casing?
A: The overall physical dimensions are 1220mm in length (L), with a total reflector width (W1) of 125mm and total height (H1) of 79mm. The base channel measures 50mm wide by 37mm high.
Q3: Is the PMW T8 LED Angle Reflector casing waterproof?
A: No, the PMW VER140T8 carries an IP20 rating, which means it is designed for indoor dry locations protected against solid objects larger than 12.5mm. It is not suitable for direct rain or high-moisture outdoor exposed areas.
Q4: What material is used to construct the PMW VER140T8 reflector body?
A: The housing body is manufactured from durable Cold-Rolled Steel, providing high structural strength, resistance to bending, and long operational life in commercial applications.
Q5: What is the difference between a standard T8 casing and an Angle Metal Reflector (AMR) casing?
A: A standard T8 batten casing distributes light evenly in all directions (180°–360°). An Angle Metal Reflector (AMR) casing uses an angled metal shade to block upward/side light spill and redirect all illumination forward at a targeted angle for higher lux intensity.
Q6: Can I install this PMW T8 angle reflector casing in warehouse racks or retail shelves?
A: Yes, the angled reflector design makes the PMW VER140T8 ideal for mounting above warehouse racks, factory workstations, retail display boards, and wall-wash lighting where focused, non-glare illumination is required.
Q7: How do I install the PMW VEGAS 1x4ft T8 angle metal reflector casing?
A:The casing can be surface-mounted directly to ceilings or walls, or suspended using hanging wire/chains depending on your facility setup.
Q8: Where can I buy PMW T8 LED angle metal reflector fittings in Malaysia?
A: PMW lighting products are available through authorized electrical distributors, industrial lighting contractors, and official B2B lighting supplier portals across Malaysia.
.png)
.png)
.png)
A: The PMW VER140T8 is a 4ft single-tube light casing featuring an Angle Metal Reflector (AMR). It is used in industrial and commercial environments to direct light at a specific angle toward task surfaces, retail shelves, or machinery, preventing light loss and glare.
Q2: What are the exact dimensions of the PMW VER140T8 4ft T8 casing?
A: The overall physical dimensions are 1220mm in length (L), with a total reflector width (W1) of 125mm and total height (H1) of 79mm. The base channel measures 50mm wide by 37mm high.
Q3: Is the PMW T8 LED Angle Reflector casing waterproof?
A: No, the PMW VER140T8 carries an IP20 rating, which means it is designed for indoor dry locations protected against solid objects larger than 12.5mm. It is not suitable for direct rain or high-moisture outdoor exposed areas.
Q4: What material is used to construct the PMW VER140T8 reflector body?
A: The housing body is manufactured from durable Cold-Rolled Steel, providing high structural strength, resistance to bending, and long operational life in commercial applications.
Q5: What is the difference between a standard T8 casing and an Angle Metal Reflector (AMR) casing?
A: A standard T8 batten casing distributes light evenly in all directions (180°–360°). An Angle Metal Reflector (AMR) casing uses an angled metal shade to block upward/side light spill and redirect all illumination forward at a targeted angle for higher lux intensity.
Q6: Can I install this PMW T8 angle reflector casing in warehouse racks or retail shelves?
A: Yes, the angled reflector design makes the PMW VER140T8 ideal for mounting above warehouse racks, factory workstations, retail display boards, and wall-wash lighting where focused, non-glare illumination is required.
Q7: How do I install the PMW VEGAS 1x4ft T8 angle metal reflector casing?
A:The casing can be surface-mounted directly to ceilings or walls, or suspended using hanging wire/chains depending on your facility setup.
Q8: Where can I buy PMW T8 LED angle metal reflector fittings in Malaysia?
A: PMW lighting products are available through authorized electrical distributors, industrial lighting contractors, and official B2B lighting supplier portals across Malaysia.
Specifications
Sorry, currently do not have any video uploaded.
